Industrial engineering tools, built for the shop floor
Run a time study on your phone, balance a line with real precedence, and check takt and OEE. Every formula is shown, every tool is tested, and nothing you type leaves your browser.
- Formulas & sources shown
- Tested on simulated plants
- No data collected
Four tools for the jobs you do every week
Each one opens instantly on a phone or a laptop. Start with the example data, then type your own.
Tap time study High confidence
Tap as each step ends. Get standard time, units per hour and a 95% sample-size check, with a chart of every reading.
Open time study →Line balancing High confidence
Enter tasks with must-follow rules. Get the fewest stations, balance efficiency, and the output you can really expect when task times vary.
Open line balancing →Takt time & operators High confidence
Takt from demand and available time, planned cycle time, and the minimum operators your work content needs.
Open takt →OEE calculator High confidence
Availability, performance and quality, with minutes lost to breakdowns, small stops, slow cycles and scrap.
Open OEE →How it works
No account, no install, no spreadsheet.
On your phone at the line, or on a laptop at your desk. It loads with a worked example.
Type your numbers, or tap through a time study. Results and charts update as you go.
Every formula and source is on the page. Copy the results as CSV for your report.
Why engineers use these
Made by an industrial engineer, for the questions that come up on the floor.
Tap a time study on your phone. No laptop, no stopwatch, no spreadsheet.
Every tool shows its math, so you can check it and defend it in a review.
Each tool was stress-tested against simulated plants. Confidence labels tell you how far to trust it.
No sign-up and no data collection. Calculations run in your browser.
Take it to the line
Open the time study on your phone and tap your first cycle.